Metabones Speed Booster Adaptor - Canon EF to BMCC Micro Four Thirds

Name: Metabones Speed Booster Adaptor - Canon EF to BMCC Micro Four Thirds
Brand: Metabones
SKU: LENMET105
Price: 1537.0 AUD
Availability: OutOfStock

SKU LENMET105

Sold out

$1,620.00

$1,620.00 - $1,620.00

$1,620.00

$1,537.00

$1,537.00 - $1,537.00

$1,537.00

14 Dec. Estimated arrival

11 Dec. Order placed

12-13 Dec. Order dispatches

14 Dec. Delivered!

Canon EF to BMCC mount Speed BoosterTM adaptors designed exclusively for the Blackmagic 2.5k Cinema Camera (BMCC). Note that the new Speed Boosters will only attach to Blackmagic cameras equipped with a Micro-4/3 mount. They cannot be attached to standard Micro 4/3 cameras.

View more product information

features

Increase maximum aperture by 11/3 stop. (with a maximum output aperture of f/0.80)
Increase MTF.
Makes lens 0.64x wider.
Optics designed by Caldwell Photographic in the USA (patent pending).
When using with 'passive' (without electronic control pin) MFT camcorders/cameras, such as BMCC 2.5K MFT and Digital Bolex D16 MFT, the Speed Booster must be powered by external power source via Micro-USB socket. Input Voltage is 5V DC. (Battery is NOT included in the box).
When using with 'active' (with electronic control pin) MFT camcordrs/cameras, such as BMPCC MFT, the Speed Booster can be powered by camera body. no external power source required.
Build-in electonics to control lens aperture.
The Lens aperture is set by the dial button on the adaptor.
High performance 32-bit processor and efficient switched-mode power supply.
The tripod foot is detachable and compatible with Arca Swiss, Markins, Photo cam ball heads.

specifications

Supported:	EF lenses BMCC 2.5K, BMPCC and Digital Bolex D16 MTF camcorders Image stabilization (IS) lenses Electronic manual focusing (e.g. EF 85/1.2L II and discontinued EF 50/1.0L) on BMPCC EXIF (focal length, aperture, zoom range) on BMPCC Distance and zoom display on BMPCC (with active MFT mount) camcorder (see note 1). However, this feature is not for BMCC 2.5K. Contax N mount lenses modified to Canon EF by Conurus (see note 2) Contax 645 NAM-1 adaptor modified to Canon EF by Conurus (see note 2) Sigma, Tamron and Tokina lenses in Canon EF mount (see note 2) 2. A third party zoom lens may need to be registered with the Speed Booster/Smart adaptor first in order to detect its maximum aperture.
Not supported:	Autofocus EF-S lenses GH4 Lens correction such as peripheral shading, CA and distortion Focus confirmation 'chip' (e.g. Dandelion) M42 screw mount adaptors (see note 5) Stacking non-Metabones/non-Conurus mount adaptors on top (see note 6 and list of lenses which require modification below.
Notes:	1. Requires lenses supporting distance information. 2. A third party zoom lens may need to be registered with the Speed Booster/Smart adaptor first in order to detect its maximum aperture. 3. This Speed Booster is designed to cover an BMCC image circle which is not big enough to cover a full-size 36mm x 24mm sensor. 4. For use with fast lenses (faster than f/1.8), the pre-boost apertures will be displayed in the camera. Slow lenses will report boosted apertures to the camera body but fast lenses will report pre-boost apertures. We won't show f/0.7 with a f/1.2 lens attached, but show f/1.2 instead. Example: a) EF 85/1.2L attached, camera display = f/1.2, physical aperture (lens + Speed Booster combined) = f/0.74. b) Sigma 18-35/1.8 attached, camera display = f/1.0, physical aperture (lens + Speed Booster combined) = f/1.0. 5. Some improperly-made M42 screw mount adaptors may short the electronic contacts of the Speed Booster and cause damage to the Speed Booster and/or camera body. 6. Many manual focus lenses (e.g. OM 28/2.8, OM 50/1.8, Leica R 15/3.5) have rear protrusions (spikes, levers, other appendages) which would damage the optics and/or housing of Speed BoosterTM. They need to be modified before they can be safely used on Speed BoosterTM Check and make sure there are no rear protrusions from the adaptor/lens combination before using on Speed Booster. Scratches and damages caused by rear protrusions on Speed BoosterTM are not covered by warranty. 7. This Speed Booster may NOT be fully compatible with GH4 or other MFT camera. This is use only with BMCC or BMPCC. When Speed Booster® is used with other MFT camera, it may cause damage on the camera.
List of lenses (have been tested by metabones) with support on EF-BMCC Speed Booster.:	Canon EF zooms Canon 20-35mm3.5-4.5 Canon 28-80mm2.8-4L Canon 70-200mm2.8L Canon 24-70mm2.8_II Canon 24-105mm4_L Canon 70-200mm4_L Canon 70-300mm4-5.6L Canon 70-300mm4-5.6 Canon EF primes Canon 50mm1.8 Canon 50mm1.4 Canon 85mm 1.2 Canon 100mm 2.8 Others Sigma 18-200mm3.5-6.3 Zeiss 35mm2
List of manual focus lenses which REQUIRE MODIFICATION to be used on Speed Booster Many manual focus lenses have rear protrusions (spikes, levers, other appendages) which would damage the optics and/or housing of Speed BoosterTM They need to be modified before they can be safely used on Speed BoosterTM Check and make sure there are no rear protrusions from the adaptor/lens combination before using on Speed Booster. Scratches and damages caused by rear protrusions or by poor quality adaptors are not covered by warranty. The following is an incomplete list of lenses known to be incompatible.:	Leica R Super-Elmar-R 15mm Elmarit R 28/2.8 Elmarit R 35/2.8 Summicron R 50/2 Nikon F 20/2.8 AI-S Olympus OM OM 18/3.5 OM 21/2 OM 21/3.5 OM 28/2.8 OM 50/1.8 Pentax K Every Pentax K-mount lens has a protruding fin and an aperture lever. It does NOT fit.

description

Canon EF to BMCC mount Speed BoosterTM adaptors designed exclusively for the Blackmagic 2.5k Cinema Camera (BMCC). Note that the new Speed Boosters will only attach to Blackmagic cameras equipped with a Micro-4/3 mount. They cannot be attached to standard Micro 4/3 cameras.

The new 0.64x Speed Booster reduces the full-frame crop factor of the BMCC from 2.39x to 1.53x, thus effectively transforming it into a Super-35 format cine camera. In addition, the speed of any attached lens is increased by 11/3 stops, with a maximum output aperture of f/0.80.

contents

manufacturer

Metabones

Frequently Asked Questions

How long will it take for my order to arrive?

This can be as fast as 1-2 business days on the eastern seaboard, and 3-5 business days to the western seaboard.

However , shipping times vary depending on the location of our distributors (all are based in Australia), your delivery address (metro, regional or rural), and any network disruptions that may be occurring (for example, delays due to extreme weather events).

If you need your order urgently, or by a specific date, please Contact us so we can find a solution that works best for you.

You will receive tracking information for all orders so you can keep an eye on the delivery status too.

What are your shipping options?

Our items are typically shipped directly from our distributors to you.

In most cases, this means there is only one shipping option available, which is typically the most efficient and cost-effective delivery method available. It also means your order may arrive in multiple packages from multiple carriers.

We will provide you with tracking information for all items so you can keep an eye on their delivery status.

If you require an item urgently, please contact us so we can find a solution that works best for you.

Do you offer discounts for bulk orders?

The honest answer is, it depends on the brand and quantity you're looking to order. We're here to make the process as smooth as possible for you, so if you're looking to place a bulk order, the best thing to do is contact us directly, so we can provide a personalised quote for you.

What is your return policy?

If you have placed an order with us and wish to cancel your order for any reason – even if you simply change your mind – we will provide you with a full refund, provided that we receive notice of the cancellation of your order before we have begun processing your order.

If we have already started processing your order, or you've already received it, please read our Change of Mind policy.

How can I contact customer support?

You can give us a call on 1300 304 607 Monday to Friday between 9am and 5pm. Send us an email to email me sales@new-media.com.au or fill out our contact form .