Magewell 11040 Pro Capture HDMI Capture Card

Name: Magewell 11040 Pro Capture HDMI Capture Card
Brand: Magewell
SKU: VIOMWL101
Price: 611.0 AUD
Availability: InStock

SKU VIOMWL101

Save 4%

$634.40

$634.40 - $634.40

$634.40

$611.00

$611.00 - $611.00

$611.00

The Pro Capture HDMI Card from Magewell is a low-profile PCIe x1 card that allows for capturing a single channel of HDMI input.

View more product information

features

HDMI Input

225 MHz HDMI receiver
Adaptive HDMI equalizer support for cables lengths up to 98'
Supports customized EDID
Supports extraction of AVI/Audio/SPD/MS/VS/ACP/IRSC1/ISRC2/Gamut InfoFrames
Full colorimetry support
Supports 8/10/12-bit color depths
Supports RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
Supports up to 8-channel IEC60958/IEC61937 audio streams
Supports extraction of audio formation information & channel status data, video timing, 3D format information, and Sony/Canon DSLR time code

Component Input

12-bit ADC
Supports RGB & YCbCr (YUV) color formats
Supports Separated sync, Composite sync, Sync-on-green (SOG), Sync-on-luminance (SOY)
Supports DMT, CEA, CVT, GTF video timings
Input signals up to 165 MHz pixel rate are digitized with 1:1 sampling whereas those over 165 MHz can be digitized with horizontal sub-sampling (resulting in some image quality loss; not officially supported)
Auto detection of RGB & YCbCr color formats
Auto or manual sampling phase adjustment
Auto horizontal alignment
Supports customized video timings and customized video resolutions for CVT/GTF timings

YC & Composite Input

12-bit ADC
Supports NTSC, PAL, and SECAM standards
Auto detection of video input standard

Video Processing

Two video processing pipelines with approximately 180MP/s processing bandwidth for each
Supports full 10-bit video processing
Video cropping and scaling
Video de-interlacing (wave, blend top & bottom, top field only, bottom field only)
Aspect ratio conversion
- Automatic or manual selection of input and output aspect ratios
- Three aspect ratio conversion modes: ignore (anamorphic), cropping, or padding (letterbox or pillarbox)
Video color format conversion
- Automatic and manual selection of input/output color format, quantization ranges, and output saturation range
- Supports RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats
- Limited or full quantization range
- Limited, full, and extended gamut saturation range
Video frame rate conversion
Video OSD composition
- PNG OSD image of up to 2048x2048
- Dynamic loading of RGBA OSD image via SDK

Multiple Cards per System

Supports multiple cards plugged into one system
On-board rotary switch to set card number, with 16 positions from 0 to F
System hardware device tree will display “01: Pro Capture AIO” when rotary switch is set to 1, and so on
The video and audio device names displayed in your software will include the card number (set by the rotary switch)

Multiple Output Streams

Unlimited output streams for any one input channel
Independent cropping, aspect ratio, color format, resolution, frame rate, de-interlacing, and color adjustment settings for each individual stream

Ultra-Low Latency Support

Latency of 64 video lines
Partial notification mode in SDK

Timestamp & AV Synchronization

Hardware-based 100ns high-resolution clock
Audio frames (192 audio samples) & video frames are stamped with hardware clock
Hardware clock can be synchronized across cards (via SDK)

Video Output SG-DMA

Supports auto detection of Intel tiled GPU surface
Supports DirectGMA for AMD video adapter chipsets
Supports GPUDirect for NVIDIA video adapter chipsets
400 MB/s per channel DMA bandwidth in a PCIe 2.0 system
200 MB/s per channel DMA bandwidth in a PCIe 1.0 system

SDK

Pro Capture SDK for DirectShow for easy integration (Windows)
Pro Capture SDK for DirectKS for maximum flexibility & performance (Windows)

Windows Driver Tweaks

All options can be controlled by three levels of registry key: global level, product level, and device level
Video, audio, crossbar filter names can be customized via registry keys

Firmware Upgrade

Multiple cards in one system can be upgraded simultaneously
Cards can be upgraded without a system power shutdown when it is not in use
Supports Safe upgrade
- If power off or system breakdown occurs when the firmware is being upgraded, it will automatically restore to the initial version (only available for firmware version 1.21 and above)

specifications

Input Interface	1 x HDMI type A 1 x DB9 (S-Video, Composite, Component, Stereo Analog Audio)
Output Interface	PCIe Gen2 x1
Supported OS	Windows 7/8/8.1/10/2008/2008 R2/2012 (x86 & x64) Linux (based on V4L2, supports x86, x64 & arm architecture) Mac OS X
Supported APIs	Windows: DirectShow, DirectKS, Wave API/DirectSound/WASAPI Linux: V4L2, ALSA
Supported Software	VLC, VirtualDub, OBS, xSplit, vMix, VidBlaster, Wirecast, Microsoft Media Encoder, Adobe Flash Media Encoder Any other DirectShow/V4L2 encoding/streaming software
Video Output Format	Image resolutions up to 2048 × 2048 pixels Frame rates up to 120 fps (actual output frame rate can be limited by PCIe bandwidth, and at higher image resolutions; above 1280×1024) 4:2:0 8-bit output formats: NV12, I420, YV12 4:2:2 8-bit output formats: YUY2, YUYV, UYVY 4:4:4 8-bit output formats: V308, IYU2, V408, BGR24, BGR32 4:4:4 10-bit output formats: V410, Y410 More output formats are supported via Pro Capture SDK for DirectKS
Video Output SG-DMA	400 MB/s per channel DMA bandwidth in a PCIe 2.0 system 200 MB/s per channel DMA bandwidth in a PCIe 1.0 system
LED Indicator	Per Channel: idle, input signal locked, memory failed, or FPGA configuration failed
Power Consumption	Maximum Current at 12 V: 0.4 A Maximum Current at 3.3 V: 0.2 A Maximum Power Consumption: 4.9 W
Operating Temperature	32 to 104°F (0 to 40°C)
Storage Temperature	-4 to 158°F (-20 to 70°C)
Relative Humidity	5 to 90% non-condensing
Form Factor	Low profile PCIe x1 add-on card 3.7 x 2.7" (92.8 x 68.9 mm) without PCI bracket

description

The Pro Capture HDMI Card from Magewell is a low-profile PCIe x1 card that allows for capturing a single channel of HDMI input. It supports capturing of component plus audio, composite plus audio, and S-video plus audio via the included DB-9 breakout cable, and HDMI plus embedded audio via the HDMI port. The card also supports multiple color sampling modes, 10- and 12-bit color depths, up to 8 audio channels at 48 kHz, and output resolutions up to 2048x2048 with frame rates up to 120 fps. It is also capable of numerous video processing features, including cropping, scaling, de-interleaving, aspect ratio conversion, color format conversion, video frame rate conversion, and video OSD composition. Pro Capture HDMI Card supports multiple cards per system and unlimited output streams with independently adjustable parameters per stream. Additional features include ultra-low latency, timestamp and A/V synchronization, and LED status indicators. The card supports Windows, Linux, and Mac operating systems, multiple APIs for Windows and Linux, and provides Windows SDKs for easier integration.

contents

Magewell 11040 Pro Capture HDMI Capture Card

Low Profile Bracket

DB9 to YC + Composite + Analog Audio + Component Breakout

Warranty

manufacturer

Magewell

Frequently Asked Questions

How long will it take for my order to arrive?

This can be as fast as 1-2 business days on the eastern seaboard, and 3-5 business days to the western seaboard.

However , shipping times vary depending on the location of our distributors (all are based in Australia), your delivery address (metro, regional or rural), and any network disruptions that may be occurring (for example, delays due to extreme weather events).

If you need your order urgently, or by a specific date, please Contact us so we can find a solution that works best for you.

You will receive tracking information for all orders so you can keep an eye on the delivery status too.

What are your shipping options?

Our items are typically shipped directly from our distributors to you.

In most cases, this means there is only one shipping option available, which is typically the most efficient and cost-effective delivery method available. It also means your order may arrive in multiple packages from multiple carriers.

We will provide you with tracking information for all items so you can keep an eye on their delivery status.

If you require an item urgently, please contact us so we can find a solution that works best for you.

Do you offer discounts for bulk orders?

The honest answer is, it depends on the brand and quantity you're looking to order. We're here to make the process as smooth as possible for you, so if you're looking to place a bulk order, the best thing to do is contact us directly, so we can provide a personalised quote for you.

What is your return policy?

If you have placed an order with us and wish to cancel your order for any reason – even if you simply change your mind – we will provide you with a full refund, provided that we receive notice of the cancellation of your order before we have begun processing your order.

If we have already started processing your order, or you've already received it, please read our Change of Mind policy.

How can I contact customer support?

You can give us a call on 1300 304 607 Monday to Friday between 9am and 5pm. Send us an email to email me sales@new-media.com.au or fill out our contact form .