AJA IPR-10G2-SDI: Single Channel SMPTE ST 2110 IP Decoder to SDI with Hitless Switching - New Media

Availability:

Out of stock

AJA IPR-10G2-SDI: Single Channel SMPTE ST 2110 IP Decoder to SDI with Hitless Switching

Name: AJA IPR-10G2-SDI: Single Channel SMPTE ST 2110 IP Decoder to SDI with Hitless Switching
Brand: AJA
SKU: VFCAJA208
Price: 3253.0 AUD
Availability: OutOfStock

SKU VFCAJA208

Sold out

$3,430.00

$3,430.00 - $3,430.00

$3,430.00

$3,253.00

$3,253.00 - $3,253.00

$3,253.00

IPR-10G2-SDI provides monitoring of HD SMPTE ST 2110 signals across 10 GigE to two 3G-SDI ouputs.

View more product information

features

IPR-10G2-SDI extracts a SMPTE ST 2110 essence from an incoming IP stream and presents it for display on SDI devices. Providing two SFP+ cases for protection with "hitless switching". Its rugged, fanless, Mini-Converter design is ideal for placement in a wide range of display scenarios, from studios to field.

Key features:

SMPTE ST 2110 audio, video receiver
Supports HD up to 60p, YCbCr 4:2:2
Rugged, fanless design
2x 10 GigE SFP+ cages for media LAN (providing support for "hitless switching) with status light
1x 1 GigE RJ-45 socket for control LAN with status light
2x 3G-SDI Outputs
Full 10-bit pixel processing pipeline
Embedded SDI audio output (up to eight channels)
2x RCA analog audio output
1x mini-USB port for initial network configuration with AJA eMini-Setup software
Complete control interface on any web browser from a built-in webserver
Customizable control with AJA REST API
5-year international warranty and support

specifications

Video Formats

(HD) 1920 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
(HD) 1920 x 1080i 50, 59.94
(HD) 1280 x 720p 50, 59.94, 60
(SD) 625i 50
(SD) 525i 59.94

Video Quality

10-bit, 4:2:2, uncompressed

Media Transport Interface

SMPTE ST 2110 (-10, -20, -21, -30)
- 2x SFP+ Cages - SFPs not included
Recommended 10 GigE SFP+ modules:
- Arista Networks SFP-10G-SR Compatible 10GBASE-SR
- Fiberstore SFP-10GSR-85 10G SFP+ 850nm
- Finisar FTLX1471D3BCL (for single mode 1310nm)
- Mellanox MFM1T02A-SR 850nm 10G

Note: Maximum supported SFP+ power is 500 mW per SFP+ cage

Video Input IP

SMPTE ST 2110
- Single channel video input
- SMPTE ST 2022-7 dual stream input for hitless switching
- Rx support for Narrow/Wide, Gapped/Linear Modes

Audio Input IP

SMPTE ST 2110
- Up to 16 channels audio, 24-bit per channel, 48 kHz synchronous
- 1 ms or 125 µs packet interval
- SMPTE ST 2022-7 dual stream input for hitless switching

*Streams with up to 16-channels are received but only the first 8 are output

Video Output Digital

2x 3G SDI BNC (single source, mirrored output)
- Up to 1080 60p, 4:2:2, 10-bits/pixel, YCbCr

Audio Output Digital

Up to 8-Channel, SDI embedded audio, 24-bit per channel, 48 kHz synchronous

Audio Output Analog

2x RCA analog audio
- Levels at -10 dBu (nominal)

Reference

1x BNC
- Reserved for Future Potential Features

Discovery, Registration and Control

NMOS Rx discovery and control according to standards IS-04 v1.2 and IS-05 v1.0
Ember+ control (no discovery, control only)
AJA REST API control (discovery via SSDP or MDNS)
Supported over dedicated management Ethernet port and in-band over media ports

IP Clock

PTP support compliant with PTP PTPv2 / IEEE 1588-2008
SMPTE ST 2059-1 compliant

User Controls

1x RJ-45 for 10/100/1000 Base-T Ethernet
- Web and REST clients supported for remote network setup and configuration
1x USB 2.0 Mini-B connector
- AJA eMini-Setup supported for network setup and configuration via local desktop computer
Web and REST configuration is also supported in-band over media ports

Size (w x d x h)

5.07" x 0.94" x 5.06" (128.78 x 23.88 x 128.52 mm)

Weight

0.6 lb (0.3 kg)

Power

5-20VDC Regulated, 13 Watts, Power supply required (DWP-U-R1 included with purchase)

Environment

Safe Operating Temperature: 0 to 40 C (32 to 104 F)
Safe Storage Temperature (Power OFF): -40 to 60 C (-40 to 140 F)
Operating Relative Humidity: 10-90% noncondensing
Operating Altitude: <3,000 meters (<10,000 feet)

description

[Brochure]

IPR-10G2-SDI provides monitoring of HD SMPTE ST 2110 signals across 10 GigE to two 3G-SDI ouputs.

It receives SMPTE 2110 over 10 GigE connectivity, formats the data for output over 3G-SDI, and the associated audio from the video stream is extracted, synchronized, and embedded into the 3G-SDI signal and also output on an analog RCA interface.

The IPR-10G2-SDI features 2x 10 GbE SFP+ cages allowing “hitless switching”, providing redundancy protection for critical distribution and monitoring applications.

Monitor ST 2110 Video and Audio from anywhere on the Network.

The IPR-10G2-SDI is a SMPTE ST 2110 to SDI Mini-Converter suited for point-of-use applications including source monitoring and 3G-SDI output to compatible devices. With two 3G-SDI outputs with mirrored source video, you can drive a display and connect to 3G-SDI simultaneously.

With 3G/1.5G-SDI routers often at capacity while facilities await their transition to IP, there is a huge benefit in being able to send video sources from a feed, camera, router or edit bay via IP and provide SDI monitoring at the destination while feeding your video and audio further into a 3G-SDI chain.

The AJA IPR-10G2-SDI receives SMPTE ST 2110 IP video and audio, then formats the data for output over 3G-SDI.

The audio associated with the video stream is extracted, synchronized, and then embedded into the SDI interface as well as output on an analog RCA interface.

Workflow

IPR-10G2-SDI provides two SDI outputs from SMPTE ST 2110 video and audio over IP compatible devices. Combine your IPR-10G2-SDI units with AJA KONA IP (I/O card for use in desktop workstations) to instantly create a real-world ST 2110 workflow for video over IP production and monitoring.

User Control

IPR-10G2-SDI provides two key methods for control. The Control LAN Ethernet port enables control of the Mini-Converter from web browsers on any platform and REST clients. The mini-USB connector facilitates quick and simple initial network configuration, and firmware updates.

1x RJ-45 (IEC 60603-7) for 10/100/1000 Base-T Ethernet (IEEE 802.3-2012)
HTTP/1.1 (RFCs 7230, 7231, 7232, 7233, 7234, 7235)
Web and REST clients supported
1x USB 2.0 Mini-B (IEC 62680-1) connector
AJA eMini-Setup of network parameters

contents

AJA IPR-10G2-SDI Single Channel SMPTE ST 2110 IP Decoder To SDI With Hitless Switching
Warranty

manufacturer

AJA

Frequently Asked Questions

How long will it take for my order to arrive?

This can be as fast as 1-2 business days on the eastern seaboard, and 3-5 business days to the western seaboard.

However , shipping times vary depending on the location of our distributors (all are based in Australia), your delivery address (metro, regional or rural), and any network disruptions that may be occurring (for example, delays due to extreme weather events).

If you need your order urgently, or by a specific date, please Contact us so we can find a solution that works best for you.

You will receive tracking information for all orders so you can keep an eye on the delivery status too.

What are your shipping options?

Our items are typically shipped directly from our distributors to you.

In most cases, this means there is only one shipping option available, which is typically the most efficient and cost-effective delivery method available. It also means your order may arrive in multiple packages from multiple carriers.

We will provide you with tracking information for all items so you can keep an eye on their delivery status.

If you require an item urgently, please contact us so we can find a solution that works best for you.

Do you offer discounts for bulk orders?

The honest answer is, it depends on the brand and quantity you're looking to order. We're here to make the process as smooth as possible for you, so if you're looking to place a bulk order, the best thing to do is contact us directly, so we can provide a personalised quote for you.

What is your return policy?

If you have placed an order with us and wish to cancel your order for any reason – even if you simply change your mind – we will provide you with a full refund, provided that we receive notice of the cancellation of your order before we have begun processing your order.

If we have already started processing your order, or you've already received it, please read our Change of Mind policy.

How can I contact customer support?

You can give us a call on 1300 304 607 Monday to Friday between 9am and 5pm. Send us an email to email me sales@new-media.com.au or fill out our contact form .